XGP5901 Series
Industrial Protocol Gateway

XGP5901 Series

Industrial Protocol Gateway

Key Features:

• Dual 10/100 Mbps Ethernet port, PoE PD
• 1-port RS-232/422/485, baud rate up to 921.6 Kbps
• IP30 Metal housing with Aluminum heat sink
• Strong EMC protection, works in environments from -40 to 85°C
• Same hardware platform for different protocol conversion (Modbus TCP/RTU/ASCII, DNP3.0 TCP or serial, IEC 60870-5-101, IEC 60870-5-103, IEC 60870-5-104, IEC 61850)
• User friendly configuration with a Java-Based Windows utility
• Embedded IPsec, PPTP and OpenVPN for enhanced security
• Redundancy through embedded RSTP Protocol

Description

PROTOCOL SPECIFICATION

IEC61850 Server/ Client
Supported Functions · Generic access to the data (Read, Write)

· 8 Logical Devices per Port

· GOOSE (Generic Object Oriented Substation Event)
– a GOOSE message will be generated by the gateway automatically upon event(*)

· (*)Being other protocols not Real-Time, there is no guarantee that GOOSE message is generated within 1 ms from the event itelf.

Supported Control Type of commands · Generic access to the data (Read, Write)

· 8 Logical Devices per Port

· GOOSE (Generic Object Oriented Substation Event)

Implemented Protocol Subsets · IEC 61850-6 (Substation Configuration Language Description: SCL)

· IEC 61850-7-1 (Principles and Models)

· IEC 61850-7-2 (Abstract Communication Service

· Interface: ACSI

· IEC 61850-7-3 (Common Data Classes: CDC)

· IEC 61850-7-4 (Logical Nodes and data Object Classes)

· IEC 61850-8-1 (Mapping to Manufacturing Message Specification: MMS)

· Edition 1 & Edition 2 are both Supported

DNP3 Server/ Client/ Master/ Slave
General Specifications · Serial Mode or Ethernet with TCP or UDP Mode

· Server side supports serving up to 5 client in TCP Mode

· Client side in a single RS-485 port, supports connecting up to 16 IEDs

· Client side supports connecting up to 16 IEDs

· Maximum Fragment size 2048 octets

· Protocol implementation with configurable parameters conforms to IEEE Std 1815-2012 level 2

Supported Functions · Time Synchronization generic access to the data(Read, Write)

· Commands with or without preselection (Select, Operate, Direct Operate)

· Transmission of time-tagged events

· Self-address

Supported DNP3 Object Library · Binary Inputs up to 8000 pts

· Binary Outputs up to 2000 pts

· Double Inputs up to 4000 pts

· Analog Inputs up to 250 pts

· Analog Outputs up to 250 pts

· Counters up to 250 pts

Modbus Server/ Client/ Master/ Slave
General Specifications · Support Modbus RTU and ASCII in Serial mode

· Support Modbus in TCP mode

· For Modbus Client in TCP mode, support connecting up to 64 Modbus servers

· For Modbus Server in TCP mode, support serving up to 64 Modbus clients

· Support maximum number of data points in read direction: 8000 pts

· Support maximum number of commands in write direction: 4000 pts

Supported Function Codes 1: Read Coils
2: Read Discrete Inputs
3: Read Holding Registers
4: Read Input Registers
5: Write Single Coil
6: Write Single Register
15: Write Multiple Coils
16: Write Multiple Registers
43/14: Read Device Identification (server side only)
Supported Exception Codes 1: illegal function
2: illegal data address
3: illegal data value
4: server device failure
6: server device busy
IEC 60870-5-101 Master/ Slave
General Specifications · Protocol implementation with configurable parameters conforms to the IEC 60870-5-101 edition 2 specification
· Process Information in Monitor and Control Direction
· Balanced and Unbalanced Modes
· CP24Time2a or CP56Time2a timestamp for monitor direction report
Supported Functions · Station Initialization

· Interrogation

· Read Procedure

· Cyclic Data and Spontaneous Transmission (Slave Side only)

· Clock Synchronization

· Transmission of Integrated Totals

· Direct and SBO command

Supported Data Types · Monitors Points: Each supports up to 1000 pts: Single Point, Double Point, Step Position, Bit String, Measured with Normalized Value, Measured with Scaled Value, Measured Short Floating Point Value, Integrated Totals

· Control Points: Each supports up to 500 pts: Single Command, Double Command, Regulating Step Command, Set Point Command with Normalized Value, Set Point Command with Scaled Value, Set Point Command Short Floating Point, Bit string

IEC 60870-5-103 Master/ Slave
General Specifications · Protocol implementation with configurable parameters conforms to the IEC 60870-5-103:1997

· Master supports connecting up to 16 IEDs

· Process Information in Monitor and Control Direction

· Unbalanced Modes

Supported Functions · Station Initialization, Supports reset FCB and CU

· General Interrogation

· Clock Synchronization

· Command Transmission

· Test Mode

· Blocking of Monitor Direction

Supported Information · Monitor direction:

–  Status indications in monitor direction: from <16> to <30>

–  Supervision indications in monitor direction: <32>, <33>, from <35> to < 39>, <46>, <47>

–  Earth fault indications in monitor direction: from <48> to <52>

–  Fault indications in monitor direction: from <64> to <93>

–   Auto-reclosure indications in monitor direction: from <128> to <130>

–   Measurands in monitor direction: from <144> to <148>

· Control direction:
– General commands in control direction: from <16> to <19>, from <23> to <26>

IEC 60870-5-104 Server/ Client
General Specifications · Server side supports serving up to 5 client

· Client side supports connecting up to 10 IEDs

· Protocol implementation with configurable parameters conforms to the IEC 60870-5-104 specification edition 2

· Process Information in Monitor and Control Direction

· CP56Time2a timestamp for Control Commands

Supported Functions · Station Initialization

· Interrogation

· Read Procedure (Server side only)

· Cyclic Data and Spontaneous Transmission (Server side only)

· Clock Synchronization

· Transmission of Integrated Totals

· Direct and SBO command

Supported Data Types · Monitors Points:Each supports maximum 1000 pts: Single Point, Double Point, Step Position, Bit String, Measured with Normalized Value, Measured with Scaled Value, Measured Short Floating Points Value, Integrated Totals.

· Control Points: Each supports maximum 500 pts: Single Command, Double Command, Regulating Step Command, Set Point Command with Normalized Value, Set Point Command with Scaled Value, Set Point Command Short Floating Point, Bitstring.

· Event Logging (Server Side only) Universal Event Buffer up to 20,000 Events

SPECIFICATION

Network Interface
Ethernet Port 2x RJ-45
LAN Mode Dual Subnets or RSTP Redundancy
Compliance IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
Serial Interface
Connector 5-Pin 5.08mm Terminal Block or D-Sub9 connector
Port 1
Mode RS-232/422/485, software selectable
Baud Rate 1,200~921,600 bps
Parity None, Odd, Even
Data Bits 7, 8
Stop Bits 1, 2
USB Interface
Speed USB 2.0
Connector USB A Type *1
Power Characteristics
Connector 3-Pin 5.08mm Lockable Terminal Block
Input Voltage 9-48 VDC, 24VAC, 48 VDC (supplied by PoE, PoE models only),
Power Consumption 0.65A @ 9VDC
Power Redundancy No
Reverse Polarity Protection Yes
Mechanicals
Housing IP30 protection, metal housing
Dimensions (W x H x D) 32mm x 122mm x 92mm
Installation DIN-Rail or Wall-Mount (optional kit)
Reset Button Yes
Weight 400g
Environmental Limits
Operating Temperature -40°C ~ 85°C (-40°F ~ 185°F)
Storage Temperature -40°C ~ 85°C (-40°F ~ 185°F)
Ambient Relative Humidity 5 ~ 95% RH, (non-condensing)
Software
Protocols IPv4, ARP, ICMP, TCP, UDP, DHCP Client, DNS Client, Telnet, HTTP, HTTPS, SMTP/TLS, SNMP v1/v2c/v3, Syslog, 802.1D-2004 RSTP, OpenVPN or IPsec VPN (peer-to-peer or peer-to-side), with a maximum VPN throughput of 37.9Mbps(*), and PPTP

REGULATORY APPROVALS

Regulatory Approvals
Safety EN 60950-1
EMC FCC Part 15, Subpart B, Class A

EN 55032, EN 61000-3-2, EN 61000-3-3, EN 55024, EN 61000-6-2, EN 61000-6-4

Test Item Value Level
IEC 61000-4-2 ESD Contact Discharge
Air Discharge
±4KV

±8KV

4

4

IEC 61000-4-3 RD 80-1000MHz

1.4~2.0GHz

2.0~2.7GHz

10 V/m

3 V/m

1 V/m

3
IEC 61000-4-4 EFT AC Power Port
DC Power Port
Signal Port
±2.0KV

±2.0KV

±1.0KV

3

4

IEC 61000-4-5 Surge AC Power Port
AC Power Port
DC Power Port
DC Power Port
Signal Port
Line-to Line±1.0KV
Line-to Earth±2.0KV
Line-to Line±0.5KV
Line-to Earth±0.5KV
Line-to Earth±1.0KV
3

3

3

IEC 61000-4-6 CS 0.15-80MHz 10 Vrms 3
IEC 61000-4-8 PFMF Enclosure 30 A/m 3
 

IEC 61000-4-11

DIP AC Power Port 30% Reduction (Voltage Dips), 25/30 Cycle
60% Reduction (Voltage Dips): 10/12 Cycle
100% Reduction (Voltage Dips) : 1 Cycle
>95% Reduction (Voltage Dips), 0.5 period100% Reduction (Voltage Interruption) : 250/300 Cycle
Shock IEC 60068-2-27
Drop IEC 60068-2-32
Vibration IEC 60068-2-64
RoHS Yes
REACH Yes
MTBF 21.16 years (MIL-HDBK-217F-based prediction)
Warranty 5 years

The protocol gateway’s embedded protocol stacks allow

  • Seamless conversion
  • Exception / error Management
  • Unsolicited event management for the protocols requiring them (such as DNP3)
  • High performance
  • Cost saving

 

* Protocol A and Protocol B – Please refer to Protocol Availability Matrix and order information


Application Example – Modbus Serial HMI to DNP3.0

 

The example shows how to Easily connect a Modbus Serial HMI, through Agatel’s Protocol Gateway to a DNP3.0 Ethernet Server IED.
The host HMI has the role of a Modbus Serial Master while the end-device to be accessed is a DNP3.0 Ethernet Server.

Agatel’s protocol Gateway acts towards the HMI seamlessly as a Modbus Serial Slave, answering the poll commands or the write commands required by the Host by its virtual Modbus ID. Meanwhile, it acts as a DNP3.0 Ethernet Client with regard to the end-device whose DNP3.0 address is mapped to the virtual Modbus ID that the HMI is accessing.

Be careful! – all gateway functions listed in the datasheet refer to the “Gateway” role, and not which “host” or “slave” the gate way is connected to.
In this example, the SKU shown is “X2SS-X3EC” (Modbus Serial Slave to DNP3.0 Ethernet Client)

Hardware

Model Name LAN ports Serial ports Additional features
XGP5901-DB 2x RJ45 1x RS-232/485/422 (D-Sub 9)
XGP5901-TB 2x RJ45 1x RS-232/485/422 (5-pin TB)
XGP5901-P-DB 2x RJ45 1x RS-232/485/422 (D-Sub 9) PoE PD (802.3af)
XGP5901-P-TB 2x RJ45 1x RS-232/485/422 (5-pin TB) PoE PD (802.3af)

Protocols

SKU Description
XSS01-XEC04 IEC 60870-5-101 Serial Slave to IEC 60870-5-104 Ethernet Client
XSS01-XEC50 IEC 60870-5-101 Serial Slave to IEC 61850 Ethernet Client
XSS01-XECDN IEC 60870-5-101 Serial Slave to DNP3 Ethernet Client
XSS01-XECMB IEC 60870-5-101 Serial Slave to Modbus Ethernet Client
XES04-XSM01 IEC 60870-5-104 Ethernet Server to IEC 60870-5-101 Serial Master
XES04-XSM03 IEC 60870-5-104 Ethernet Server to IEC 60870-5-103 Serial Master
XES04-XEC50 IEC 60870-5-104 Ethernet Server to IEC 61850 Ethernet Client
XES04-XECDN IEC 60870-5-104 Ethernet Server to DNP3 Ethernet Client
XES04-XSMDN IEC 60870-5-104 Ethernet Server to DNP3 Serial Master
XES04-XECMB IEC 60870-5-104 Ethernet Server to Modbus Ethernet Client
XES04-XSMMB IEC 60870-5-104 Ethernet Server to Modbus Serial Master
XES50-XSM01 IEC 61850 Ethernet Server to IEC 60870-5-101 Serial Master
XES50-XSM03 IEC 61850 Ethernet Server to IEC 60870-5-103 Serial Master
XES50-XEC04 IEC 61850 Ethernet Server to IEC 60870-5-104 Ethernet Client
XES50-XECDN IEC 61850 Ethernet Server to DNP3 Ethernet Client
XES50-XSMDN IEC 61850 Ethernet Server to DNP3 Serial Master
XES50-XECMB IEC 61850 Ethernet Server to Modbus Ethernet Client
XES50-XSMMB IEC 61850 Ethernet Server to Modbus Serial Master
XESDN-XSM01 DNP3 Ethernet Server to IEC 60870-5-101 Serial Master
XESDN-XSM03 DNP3 Ethernet Server to IEC 60870-5-103 Serial Master
XESDN-XEC04 DNP3 Ethernet Server to IEC 60870-5-104 Ethernet Client
XESDN-XEC50 DNP3 Ethernet Server to IEC 61850 Ethernet Client
XESDN-XSMDN DNP3 Ethernet Server to DNP3 Serial Master (Under Development)
XESDN-XECMB DNP3 Ethernet Server to Modbus Ethernet Client
XESDN-XSMMB DNP3 Ethernet Server to Modbus Serial Master
XSSDN-XEC04 DNP3 Serial Slave to IEC 60870-5-104 Ethernet Client
XSSDN-XEC50 DNP3 Serial Slave to IEC 61850 Ethernet Client
XSSDN-XECDN DNP3 Serial Slave to DNP3 Ethernet Client (Under Development)
XSSDN-XECMB DNP3 Serial Slave to Modbus Ethernet Client
XESMB-XSM01 Modbus Ethernet Server to IEC 60870-5-101 Serial Master
XESMB-XSM03 Modbus Ethernet Server to IEC 60870-5-103 Serial Master
XESMB-XEC04 Modbus Ethernet Server to IEC 60870-5-104 Ethernet Client
XESMB-XEC50 Modbus Ethernet Server to IEC 61850 Ethernet Client
XESMB-XECDN Modbus Ethernet Server to DNP3 Ethernet Client
XESMB-XSMDN Modbus Ethernet Server to DNP3 Serial Master
XSSMB-XEC04 Modbus Serial Slave to IEC 60870-5-104 Ethernet Client
XSSMB-XEC50 Modbus Serial Slave to IEC 61850 Client
XSSMB-XECDN Modbus Serial Slave to DNP3 Ethernet Client

Optional Accessories

Optional Accessories
Model Name Description
XPA-315-12-Y-LV6-US Y-Type (5.08 mm) power adaptor,100-240VAC,1.25A@12VDC out,US plug,LV6
XPA-315-12-Y-LV6-EU Y-Type (5.08 mm) power adaptor,100-240VAC,1.25A@12VDC out,EU plug,LV6
XCA-DB9-TB5 Female DB9 to Female 3.81mm TB5 Converter
XWK-315-A-BK Black Aluminum Wall Mount Kit