XGP5908/XGP5916 Series
Industrial Protocol Gateway

•   Clock Synchronization

•   8 Logical Devices per Port

•   GOOSE (Generic Object Oriented Substation Event) – a GOOSE message will be generated by the gateway automatically upon event(*)

(*)Being other protocols not Real-Time, there is no guarantee that GOOSE message is generated within
1 ms from the event itelf.

Select Before Operate (SBO)-with-Normal-Security

•   Direct-with-Enhanced Security

Select Before Operate (SBO)-with-Enhanced-Security

•   IEC 61850-7-1 (Principles and Models)

•   IEC 61850-7-2 (Abstract Communication Service

•   Interface: ACSI

•   IEC 61850-7-3 (Common Data Classes: CDC)

•   IEC 61850-7-4 (Logical Nodes and data Object Classes)

•   IEC 61850-8-1 (Mapping to Manufacturing Message Specification: MMS)

•   Edition 1 & Edition 2 are both Supported

•   Server side supports serving up to 5 client in TCP Mode

•   Client side in a single RS-485 port, supports connecting up to 16 IEDs

•   Client side supports connecting up to 16 IEDs

•   Maximum Fragment size 2048 octets

•   Protocol implementation with configurable parameters conforms to IEEE Std 1815-2012 level 2

•   Commands with or without preselection (Select, Operate, Direct Operate)

•   Transmission of time-tagged events

•   Counter management (Immediate Freeze, Freeze and Clear)

•   Self-address

•   Binary Outputs up to 2000 pts

•   Double Inputs up to 4000 pts

•   Analog Inputs up to 250 pts

•   Analog Outputs up to 250 pts

•   Counters up to 250 pts

•   Support Modbus in TCP mode

•   For Modbus Client in TCP mode, support connecting up to 64 Modbus servers

•   For Modbus Server in TCP mode, support serving up to 64 Modbus clients

•   Support maximum number of data points in read direction: 8000 pts

•   Support maximum number of commands in write direction: 4000 pts

2: Read Discrete Inputs

3: Read Holding Registers
4: Read Input Registers

5: Write Single Coil

6: Write Single Register
15: Write Multiple Coils

16: Write Multiple Registers

43/14: Read Device Identification (server side only)

•   Process Information in Monitor and Control Direction

•   Balanced and Unbalanced Modes

•   CP24Time2a or CP56Time2a timestamp for monitor direction report

•   Interrogation

•   Read Procedure

•   Cyclic Data and Spontaneous Transmission (Slave Side only)

•   Clock Synchronization

•   Transmission of Integrated Totals

•   Direct and SBO command

Each supports up to 1000 pts: Single Point, Double Point, Step Position, Bit String, Measured with Normalized Value, Measured with Scaled Value, Measured Short Floating Point Value, Integrated Totals

•   Control Points:

Each supports up to 500 pts: Single Command, Double Command, Regulating Step Com mand, Set Point Command with Normalized Value, Set Point Command with Scaled Value, Set Point Command Short Floating Point, Bit string

•   Master supports connecting up to 16 IEDs

•   Process Information in Monitor and Control Direction

•   Unbalanced Modes

•   General Interrogation

•   Clock Synchronization

•   Command Transmission

•   Test Mode

•   Blocking of Monitor Direction

*  Status indications in monitor direction: from <16> to <30>

*  Supervision indications in monitor direction: <32>, <33>, from <35> to< 39>, <46>, <47>

*  Earth fault indications in monitor direction: from <48> to <52>

*  Fault indications in monitor direction: from <64> to <93>

*  Auto-reclosure indications in monitor direction: from <128> to <130>

*  Measurands in monitor direction: from <144> to <148>

•   Control direction:

General commands in control direction: from <16> to <19>, from <23> to <26>

•   Client side supports connecting up to 10 IEDs

•   Protocol implementation with configurable parameters conforms to the IEC 60870-5-104 specification edition 2

•   Process Information in Monitor and Control Direction

•   CP56Time2a timestamp for Control Commands

•   Interrogation

•   Read Procedure (Server side only)

•   Cyclic Data and Spontaneous Transmission (Server side only)

•   Clock Synchronization

•   Transmission of Integrated Totals

•   Direct and SBO command

Each supports maximum 1000 pts: Single Point, Double Point, Step Position, Bit String, Mea sured with Normalized Value, Measured with Scaled Value, Measured Short Floating Points Value, Integrated Totals.

•   Control Points:

Each supports maximum 500 pts: Single Command, Double Command, Regulating Step Command, Set Point Command with Normalized Value, Set Point Command with Scaled Value, Set Point Command Short Floating Point, Bitstring.

•   Event Logging (Server Side only) Universal Event Buffer up to 20,000 Events

IEEE 802.3u 100BASE-T(X)

0.21A @ 100 VAC

SNMP v1/v2c/v3, Syslog, RSTP, OpenVPN or IPsec VPN (peer-to-peer or peer-to-side), with a maximum VPN throughput of 37.9Mbps(*), and PPTP

±15KV

4

±4.0KV

±2.0KV

4

3

4

3

3

4

10 Vrms

10 Vrms

3

3

(MIL-HDBK-217F)

XGP5916-SI-DC: 13.38 years; XGP5916-SI-US/EU: 13.38 years