Description
Network interface
Ethernet Port | Â 1x 10/100BASE-T(X) RJ-45 or 1x100BASE-FX SFP Slot |
Compliance | IEEE 802.3 for 10BASE-T IEEE 802.3u for 100BASE-T(X) and 100BASE-FX |
Serial Interface
Connector | 9-Pin D-Sub9 connector(Male, -DB version) or 5-Pin Terminal block (-TB version) |
Ports2 | |
Mode | 1x RS-232(Full-function DB9)/RS-485(2 and 4 wire)/RS-422, software selectable 1x RS-232/RS-485(2 and 4 wire)/RS-422, software selectable |
Baud Rate | Â 1200~230,400 bps |
Parity | None, Odd, Even, Space, Mark |
Data Bits | 7,8 |
Stop Bits | 1,2 |
Flow Control | None, Xon/Xoff, RTS/CTS (RS-232 only) |
Power Characteristics
Connector | 3-Pin 5.08mm Lockable Terminal Block and DC Jack for redundancy |
Input Voltage
Power Consumption Power Redundancy |
3-Pin 5.08mm Lockable Terminal Block: 9-30VDC; DC Jack 5VDC
<9W Yes |
Reverse Polarity Protection | Yes |
Mechanicals
Dimensions (W x D x H) | 75 mm x 85 mm x 28 mm (without wall-mount part)
XME5202-TB/XME5202-SI: 74.5 x 108.2 x27.5mm (with wall-mount part) XME5202-DB – DB: 80.3 x 108.2 x27.5mm (with wall-mount part and DB9 connector) XME5202-S-TB: 76.6 x 108.2 x 27.5mm (with wall-mount and SFP) XME5202-S-DB: 81.4 x 108.2 x 27.5mm (with wall-mount SFP and DB9) |
Installation | Wall-Mount or DIN-Rail (optional kit) |
Reset Button | Yes |
Weight | 200g |
Environmental Limits
Operating Temperature | -40°C ~ 70°C (-40°F ~ 158°F) |
Storage Temperature | -40°C ~ 85°C (-40°F ~ 185°F) |
Ambient Relative Humidity | 5 ~ 95% RH, (non-condensing) |
Software
Protocols | TCP, IPv4, UDP, DHCP Client, HTTP, HTTPS, Telnet, ARP, SNMPv1,v2c,v3 |
Configuration | Agatel  Management Utility, Web UI, Telnet, CLI |
VirtualCOM | Windows/Linux redirection software |
Modbus | TCP/RTU/ASCII |
TCP Client | Single destination or VirtualCOM |
TCP Server | 4 Connections; VirtualCOM or reverse Telnet |
UDP | Up to 4 Ranges IP |
 Regulatory Approvals Â
Approvals | |
Safety | EN62368-1 |
EMC | FCC Part 15, Subpart B, Class A EN 55032, EN61000-6-4 EN 61000-3-2 EN 61000-3-3 EN 55024, EN61000-6-2 |
Test | Item | Value | Level | ||
IEC 61000-4-2 | ESD | Contact Discharge Air Discharge |
±4KV
±8KV |
2
3 |
|
IEC 61000-4-3 | RS | 80-1000MHz | 10(V/m) | 3 | |
IEC 61000-4-4 | EFT | AC Power Port DC Power Port Signal Port |
±2.0KV
±1.0KV ±1.0KV |
3
3 3 |
|
IEC 61000-4-5 | Surge | AC Power Port AC Power Port Signal Port |
Line-to Line±1.0KV Line-to Earth±2.0KV Line-to Earth±1.0KV |
2
2 2 |
|
IEC 61000-4-6 | CS | 0.15-80MHz | 10 Vrms | 3 | |
IEC 61000-4-8 | PFMF | Enclosure | 30A/m | 3 | |
IEC 61000-4-11 | DIP | AC Power Port | – | Â – | |
Shock | MIL-STD-810F Method 516.5 | ||||
Drop | MIL-STD-810F Method 516.5 | ||||
Vibration | MIL-STD-810F Method 514.5 C-1 & C-2 | ||||
RoHS | Yes | ||||
MTBF | TBD | ||||
Warranty | 5 years |
Model Name | DESCRIPTION |
XME5202-DB | 2-Port Entry-Level Modbus Gateway, RS-232/422/485, DB9(M) |
XME5202-TB | 2-Port Entry-Level Modbus Gateway, RS-232/422/485, Terminal block |
XME5202-SI | 2-Port Entry-Level Modbus Gateway, RS-232/422/485, 2kV Isolation, Terminal block |
XME5202-S-DB | 2-Port Entry-Level Modbus Gateway, RS-232/422/485, DB9(M) |
XME5202-S-TB | 2-Port Entry-Level Modbus Gateway, RS-232/422/485, Terminal block |
Model Name | DESCRIPTION |
XPA-315-12-Y-LV6-US | Y-Type power adapter, 100~240VAC input, 1.25A @12VDC output, US plug |
XPA-315-12-Y-LV6-EU | Y-Type power adapter, 100~240VAC input, 1.25A @12VDC output, EU plug |
XCA-DB9F-TB5 | Female DB9 to Female 3.81mm TB5 Converter |
XCA-DB9M-DB9F | XSC/XSE/XME500X to XSE/XME520X RS-485 D-Sub9 pin multiplexing adapter |
XDK-25-P-SE | Plastic DIN Rail Kit |
XTR-38-FM-2K | SFP Transceiver: 155Mbps, Multi-mode, 1310nm, 2km, -40 to +85°C, DDMI |
XTR-38-FS-30K | SFP Transceiver: 155Mbps, Single-mode, 1310nm,
30km, -40 to +85°C, DDMI |