Description
Technical Specification
| Model Name | XTS8600/XTS8600I Series |
GNSS Receiver Specifications
| GNSS Input ports | 1x GNSS Input; SMA (F) – active Antenna |
| GNSS Module specific Information | Multi-Constellation Supported: GPS L1, GLONASS L1, BeiDou B1, Galileo E1 Maximum Concurrent Constellations: 3
ÂLeap Second: Supported Sensitivity for GPS: • Tracking: -166 dBm • Reacquisition: -160 dBm • Cold Start: -148 dBm •        Hot Start: -160 dBm |
| Acquisition Times | Cold Start: < 45 seconds
Warm Start: < 7 seconds |
| Antenna Requirements | 3.3 V, < 50 mA
Minimum gain=5dB; Maximum gain + Cable Attenuation ≤ 40dB |
| GNSS Vulnerability Mitigation | Jamming: Support Detection, Warning and Switch to OCXO Holdover
Spoofing: Support Detection, Warning and Switch to OCXO Holdover (GNSS Antenna Only) |
| Antenna Vulnerability Mitigation | Antenna Cable Short: Support Detection, Warning and Switch to OCXO Holdover
Antenna Disconnection: Support Detection, Warning and Switch to OCXO Holdover |
Antenna Specifications (Accessories)
| GNSS Antenna | GNSS receiver: GPS L1, GLONASS L1, BeiDou B1, Galileo E1 LNA Gain: 40dB min
Weather-Proof Housing: IP69K Operating and Storage Temperature: -40°C ~85°C ESD: ±15KV Air Discharge Mechanical size: 66.5 mm dia. x 21 mm H MIL-STD-810F Supply Voltage Range: 2.5 to 16VDC |
| GPS Antenna | GNSS receiver: GPS L1, Galileo
Weather-Proof Housing: IP69K Operating and Storage Temperature: -40°C ~85°C ESD: ±15KV Air Discharge Mechanical size: 66.5 mm dia. x 21 mm H MIL-STD-810F Supply Voltage Range: 2.5 to 16VDC |
| Anti Jamming GNSS Antenna | GNSS receiver: GPS L1, GLONASS L1, BeiDou B1, Galileo E1 LNA Gain: 40dB Typ.
Weather-Proof Housing: IP69K Operating and Storage Temperature: -40°C ~85°C ESD: ±15KV Air Discharge Mechanical size: 66.5 mm dia. x 21 mm H MIL-STD-810F Supply Voltage Range: 2.5 to 16VDC |
| Max. Antenna Cable Length | Antenna cable:
Without amplifier: LMR-400: 150M CFD-200: 50M RG58A/U: 25M With Amplifier: LMR-400: 250M CFD-200: 80M RG58A/U: 50M |
| Max. Sync-out Cable Length | RG58 A/U Sync-Out cable:
1PPS, 10MHz, IRIG-B TTL: 150M IRIG-B AM: 150M @1K impedance, 300M @10K impedance IRIG-B RS485: 1200M |
Proven Clock Accuracy (Relative to UTC)
| 1PPS | ±40 ns Peak *1 |
| Demodulated IRIG-B | ±40 ns Peak *1 |
| Modulated IRIG-B AM | ±1 μs Peak *1 |
| RS-485 IRIG-B | ±100 ns Peak *1 |
| PTP Timestamp | ±40 ns Peak *1 |
| NTP Timestamp | ±50 us Peak , ±40 us Average *1 |
| Holdover accuracy – OCXO | < 0.5 us / 8 hours / < 72 us / 7 days *2 |
| Â | *1. Device locked to satellites for at least 24 hours.
*2. Device locked to satellites for at least 48 hours before holdover |
Network Interface
| Ethernet Standards | IEEE 802.3 10BaseT
IEEE 802.3u 100BaseT(X) IEEE 802.3ab for 1000BaseT(X) IEEE 802.3u for 100Base-FX IEEE 802.3z for 1000Base-X |
| Gigabit Ethernet Ports | Two Combo ports, 2x 10/100/1000BASE-T(X) RJ45 or 2x 100/1000 Base-X SFP Support Synchronous Ethernet (SyncE) per ITU-T G.8261 ITU-T, G.8262 and G.8264 ESMC), PTP-Capable and NTP-Capable |
| Management Port | 1x 10/100 BASE-T(X) RJ45, NTP-Capable |
I/O
| Console | 1x DB9 Serial Console Port |
| SD Slot | 1x micro-SD slot |
| Relay-Alarm Contact | Rated Operational Voltage: 24 VDC
Continuous carrier: 1A Normal Open Pickup time: 2.5ms Turn-off time: 1ms |
Sync-Out
| Standard Sync-Out
(Sync 1, Sync 2) |
Two configurable output channels (coaxial BNC (F) connector):
1. 10MHz (Square Wave) 2. 1PPS/PPM/PPH Output (Square Wave, configurable pulse width) 3. IRIG-B TTL (Support IEEE1344 and C37.118.1) 4. AFNOR French Time Code BCD, BJT, ST and ST Checksum (Contact sales for these timecodes) |
| Extend Sync-Out (NTS8600I) (Sync 3 ~ Sync 6) | Three extra configurable output channels
(Sync 3 ~ Sync 5, coaxial BNC (F) connector): 1. 10MHz (Square Wave) 2. 1PPS/PPM/PPH Output (Square Wave, configurable pulse width) 3. IRIG-B TTL B000~B007 (Support IEEE1344 and C37.118.1) 4.IRIG-B AM B120~B127 (Support IEEE1344 and C37.118.1) 5.AFNOR French Time Code 6.BCD, BJT, ST and ST Checksum (Contact sales for these timecodes) One extra standalone channel (Sync 6, TB3 connector) IRIG-B RS-485 B000~B007 (Support IEEE1344 and C37.118.1) |
| Relay-Alarm Contact | Rated Operational Voltage: 24 VDC
Continuous carrier: 1A Normal Open Pickup time: 2.5ms Turn-off time: 1ms |
Electrical output Drive Levels
| 1PPS | 5VDC 20 mA TTL compliant |
| IRIG-B TTL | 5VDC 20 mA TTL compliant |
| Modulated IRIG-B | 5Vp-p, 3.3:1 ratio, AM, Sinewave |
| RS-485 IRIG-B | ±5 VDC IRIG-B Half-Duplex; 32 Transceivers Max. a bus |
Frequency
| Oscillator | Advanced managed OCXO, with temperature drifting compensation |
IEEE1588 Profiles
| Default | IEEE 1588V2 (PTPv2)
Default UDP (IEEE1588-2008 Annex D and J) Default 802.3 (IEEE1588-2008 Annex F and J) |
| Power | IEC/IEEE61850-9-3-2016 Power Utility Profile
IEEE C37.238-2011 Power Profile, with VLAN support IEEE C37.238-2017 Power Profile, with VLAN support |
| Telecom | ITUT-G.8265.1 Frequency
ITUT-G.8275.1 Phase/Time ITUT-G.8275.2 Phase/Time |
| AVBTSN | 802.1AS Profile |
| Enterprise | Enterprise profile |
| *Media Broadcast
(In Development Plan) |
SMPTE ST 2059-2
AES67 Media Profile |
System Moods
| GNSS Locked Mood | Synchronizes time with GNSS signals for high accuracy |
| Handover Mood | Maintains time using the OCXO clock after GNSS is unavailable |
| Free Run Mood | Operates independently using RTC as the time source along with the OCXO clock |
Functions
| Network Synchronization | RFC 1119 (NTPv2) Server
RFC 1305 (NTPv3) Server RFC 5905 (NTPv4) Server RFC 1769 (SNTPv3) Server RFC 2030 (SNTPv4) Server |
| Network Protocols | VLAN (IEEE 802.1q) filtering/tagging
IEEE 802.1p QoS DSCP IPv4, IPv6 TCP, UDP DHCP Client TACAS+/ RADIUS |
| Redundancy | Devices Clustering (NTP Only)
PRP (IEC 62439-3) Bonding – Active & Backup Bonding — LACP Combo Ports |
| Management | HTTP, HTTPS
SNMP v1/v2,v3 SSH/ Telnet (CLI), could be enabled/disabled Console CLI Estimated Time Accuracy GNSS Status Power Status PTP & NTP Status SD/MMC Backup & Restore |
| Events & Alarms | Event
Log Syslog Relay & Alarm Management SNMP Trap |
Physical Characteristics
| Housing
Dimension (W x H x D) Weight Installation |
SPCC w/Zinc Plated Body + Aluminum cover IP30 Metal Housing
252.8 x 220 x 44 2KG (AC + IRIG-B) / 1,9KG (DC + IRIG-B) 1U Rack-mountable or DIN-Rail Kits (Optional) |
Power Supply
| Rated Supply Voltage | 110 – 240 VAC, 50/60HZ (XTS8600 AC series)
110 – 250 VDC (XTS8600 AC series) 24 – 60 VDC (XTS8600 DC series) |
| Input Voltage Range | 85 – 264 VAC, 50/60 HZ (AC series)
88 – 300 VDC, (AC series) 19 – 66 VDC, (DC series) |
| Power Consumption | Approximately 9.4 W (Max) |
Environmental Limits
| Operating Temperature
Storage Temperature Operating Altitude Ambient Relative Humidity |
-40°C to +85°C (-40°F to 185°F)
-40°C to +85°C (-40°F to 185°F) 5100m 5% to 95% (Non-condensing) |
Regularity Approvals
|   Safety | UL 62368-1 , CB IEC62368-1/EN62368-1 (UL Certified Operating Temperature: 75°C) | ||||
|
EMC |
FCC(EMI): FCC Part 15, Subpart B, Class A
CE(EMI): EN 55032, EN61000-6-4, Class A EN 61000-3-2 (Current Harmonics) EN |
||||
| 61000-3-3 (Voltage Flicker) CE(EMS): EN 55035, EN61000-6-2
CE(GNSS): EN 303 413. EN 301 489-19 |
|||||
| Â Â Power Automation | IEC61850-3, IEEE 1613 | ||||
| Test | Item | Value | Level | ||
|   IEC 61000-4-2 | ESD | Contact Discharge Air Discharge | ±8KV
±15KV |
4
4 |
|
| Â Â IEC 61000-4-3 | RS | Enclosure Port | 10(V/m), 80-3000MHz
20(V/m), 80-1000MHz |
3 | |
|
IEC 61000-4-4 |
Â
EFT |
AC Power Port DC Power Port Signal Port | ±4.0KV
±4.0KV ±2.0KV |
4
4 Special |
|
|
IEC 61000-4-5 |
Â
 Surge |
AC Power Port AC Power Port DC Power Port DC Power Port Signal Port | Â
Line-to Line±2.0kV Line-to Earth±4.0kV Line-to Line±1.0kV Line-to Earth±2.0kV Line-to Earth±4.0kV |
4
4 4 3 4 |
|
| Â Â IEC 61000-4-6 | CS | 0.15-80MHz | 10V rms 0.15-80MHz, 80% AM | 3 | |
| Â Â IEC 61000-4-8 | PFMF | (Enclosure) | 100A/m continuous, 1000A/m (3s) | 5 | |
|
IEC 61000-4-11 |
DIP |
AC Power Port |
30% reduction (Voltage Dips), 1 period
60% reduction (Voltage Dips), 50 period 100%, reduction (Voltage interruptions), 5 period 100% reduction (Voltage interruptions), 50 period |
– |
|
|
IEC 61000-4-16 |
Main Frequency Voltage | DC Input Port Signal Port | 30V Continuous, 300V 1s 30V Continuous, 300V 1s | 4
4 |
|
| Â Â IEC 61000-4-17 | Ripple | DC Input Port | 10% of unit | 3 | |
|
IEC 61000-4-18 |
Damped Oscillatory |
AC Power Port |
2.5KV common,
1KV differential mode @ 1MHz |
3 |
|
| Signal Port Telecommunication Port | 2.5KV common,
1KV differential mode @ 1MHz |
3 |
|||
|
IEC 61000-4-29 |
DC Voltage Dips & Interruptions |
DC Input Port |
30% Reduction (Voltage Dips):0.1 sec 60% Reduction (Voltage Dips):0.1 sec 100% Reduction
(Voltage Interruption):0.05 sec |
||
| Shock Drop Vibration | MIL-STD-810G Method 516.5
MIL-STD-810F Method 516.5 MIL-STD-810F Method 514.5 C-1 & C-2 |
||||
| RoHS2 | Yes | ||||
| MTBF | 20 years | ||||
| Warranty | 5 years / Upgradable to 10 years | ||||
| Physical Characteristics | |
HousingDimension (W x H x D) WeightInstalleation Power inputs |
SPCC IP30 Metal Housing
223 x 251 x44 mm (not including screws and rack-mount kit) TBD 1U Rack-mountable 24-60 VDC(Dual Input) or 110-240VAC/12–240VDC |
| Environmental Limits | |
| Operating Temperature Storage Temperature Ambient Relative Humidity | -40°C to +70°C (-40°F to 185°F) / LCM display maximum 0 to +70 °C
-40°C to +75°C (-40°F to 185°F) / LCM display maximum -30 to +80 °C 5% to 95% (Non-condensing) |
| REGULATORY APPROVALS | |
| Regulatory Approvals | |
| Safety | EN/IEC 62368 |
| Â
EMC |
FCC Part 15, Subpart B, Class A, EN 55032, EN 61000-6-4:Class A, EN 61000-3-2, EN 61000-3-3 |
| Power Automation | IEC61850-3, IEEE 1613 |
| Test | Item | Value | Level | ||
| IEC 61000-4-2 | ESD | Contact Discharge Air Discharge | Contact Discharge Air Discharge | 4
4 |
|
| IEC 61000-4-3 | RS | Enclosure Port | Enclosure Port | 3 | |
| IEC 61000-4-4 | EFT | AC Power Port DC Power Port Signal Port | AC Power Port DC Power Port Signal Port | 4
4 4 |
|
| IEC 61000-4-5 | Surge | AC Power Port AC Power Port DC Power Port DC Power Port Signal Port | AC Power Port AC Power Port DC Power Port DC Power Port Signal Port | 4
4 4 3 4 |
|
| IEC 61000-4-6 | CS | 0.15-80MHz | 0.15-80MHz | 3 | |
| IEC 61000-4-8 | PFMF | (Enclosure) | (Enclosure) | 5 | |
| IEC 61000-4-11 | DIP |
AC Power Port |
AC Power Port |
– |
|
| IEC 61000-4-12 | Damped Oscillatory | AC Power Port | AC Power Port | 3 | |
| Shock Drop Vibration | MIL-STD-810G Method 516.5
MIL-STD-810F Method 516.5 MIL-STD-810F Method 514.5 C-1 & C-2 |
||||
| RoHS2 | Yes | ||||
| MTBF | TBD | ||||
| Warranty | 5 years | ||||
| Model | Technology | Ethernet | Ethernet/SFP | Sync-Out | Input Voltage |
| XTS8600-DC | GPS | 1 | 2 | 2 channels | Dual 19-66 VDC |
| XTS8600-AC | GPS | 1 | 2 | 2 channels | Single 85-264VAC or 88-300VDC |
| XTS8600I-DC | GPS | 1 | 2 | 6 channels | Dual 19-66 VDC |
| XTS8600I-AC | GPS | 1 | 2 | 6 channels | Single 85-264VAC or 88-300VDC |
